Highpoint RocketRAID 1720 Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Schnittstellenkarten / Adapter Highpoint RocketRAID 1720 herunter. Highpoint RocketRAID 1720 Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 71
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
RocketRAID 1720
SATAII Host Adapter
User’s Guide
Revision: 1.0
Date: April 2007
HighPoint Technologies, Inc.
Seitenansicht 0
1 2 3 4 5 6 ... 70 71

Inhaltsverzeichnis

Seite 1 - SATAII Host Adapter

RocketRAID 1720SATAII Host AdapterUser’s GuideRevision: 1.0Date: April 2007HighPoint Technologies, Inc.

Seite 2 - Trademarks

RocketRAID 1720 Hardware Description/Installation2 -RocketRAID 1720 Hardware1 – RocketRAID 1720 Adapter LayoutPort1- Port2These represent the RocketRA

Seite 3 - Table of Contents

RocketRAID 1720 Hardware Description/Installation2 -Disk Activity (Pins 1 and 2)Pin 2 represents SATA Port 1Pin 1 represents SATA Port 2Disk Failure (

Seite 4 - Table ot Contents

RocketRAID 1720 Hardware Description/Installation2 -4. After installing the adapter, attach hard disks to the RocketRAID 1720 using anSATA data cable.

Seite 5 - Introduction

RocketRAID 1720 Hardware Description/Installation2 -4 - Verifying InstallationOnce the RocketRAID 1720 host adapter and hard disks have been installed

Seite 6 - About this Guide

Chapter 3RocketRAID 1720 BIOS UtilityContents of this Chapter:RocketRAID 1720 BIOS Utility1 - BIOS Command Overview2 - Creating RAID Arrays3 - Adding/

Seite 7 - Array initialization

RocketRAID 1720 BIOS UtilityThe RocketRAID 1720’s BIOS Utility can be accessed using the “Ctrl+H” command.This command should be displayed automatical

Seite 8 - Legacy disk

RocketRAID 1720 BIOS Utility3 -Add/Remove Spare - this command is used to assign hard disks to function asspare disks. The controller is capable of u

Seite 9 - Chapter 2

RocketRAID 1720 BIOS Utility3 -2 - Creating RAID ArraysInitializing Disks:Before creating a RAID array, the disks must be initialized.Initialization w

Seite 10 - 2 - LED Connections

RocketRAID 1720 BIOS Utility3 -6. Next, Use the ↓ arrow key to highlight the Capacity (GB) option and pressENTER. The total available capacity will b

Seite 11

RocketRAID 1720 BIOS Utility3 -3 - Updating the BIOSBIOS updates are released periodically, and posted on our website for download.There are several w

Seite 12

CopyrightCopyright © 2007 HighPoint Technologies, Inc. This document contains materialsprotected by International Copyright Laws. All rights reserved

Seite 13 - 4 - Verifying Installation

RocketRAID 1720 BIOS Utility3 -6) Select the RR1720 from the drop down menu labeled “Controller”, and pressthe “Open” button – this will allow you to

Seite 14 - RocketRAID 1720 BIOS Utility

RocketRAID 1720 BIOS Utility3 -3) Once the A:\> prompt has appeared, insert the media that contains therequired BIOS files, and type the following

Seite 15 - 1 - BIOS Command Overview

Chapter 4RocketRAID 1720 Driver andSoftware Installation Microsoft Windows(2000, XP, 2003 Server, x64 versions, Vista)Contents of this Chapter:Driver

Seite 16

Driver and Software CDThe RocketRAID 1720 retail box includes a Driver and Software CD.This CD can be used to generate driver diskettes, and install t

Seite 17 - 2 - Creating RAID Arrays

RocketRAID 1720 Driver and Software Installation4 -5. Click on the “Please Select the Diskette you want to create” drop-down button,and select the app

Seite 18

RocketRAID 1720 Driver and Software Installation4 -2. Select the desired software from the drop down menu, and click on the “OK”button.Windows Driver

Seite 19 - 3 - Updating the BIOS

RocketRAID 1720 Driver and Software Installation4 - windows asks to reboot the system, choose No.5. Windows will then display a second “Found New Hard

Seite 20

RocketRAID 1720 Driver and Software Installation4 -Installing the RocketRAID 1720 driver during a fresh WindowsVista installation1. Boot from Windows

Seite 21

RocketRAID 1720 Driver and Software Installation4 -2. In the popup window, select Hardware tab and then click Device Managerbutton.Double click the “S

Seite 22 - Chapter 4

RocketRAID 1720 Driver and Software Installation4 -Default Parameters:System Address: 127.0.0.1Port: 7402User Name: RAIDPassword: hptLogging On (cont

Seite 23 - Driver and Software CD

Table of ContentsChapter 1Introduction1 - About this Guide ...

Seite 24 - To install the RAID software:

RocketRAID 1720 Driver and Software Installation4 -Device Management - check information or change settings for host adapters, andhard disksSpare mana

Seite 25 - Windows Driver Installation

RocketRAID 1720 Driver and Software Installation4 -3. Select the desired RAID level from the drop-down list.4. Enter a name for the array using the ke

Seite 26 - 2000/XP/2003/x64 installation

RocketRAID 1720 Driver and Software Installation4 -Press Enter to use the default value (the maximum capacity for the array), orspecify the desired va

Seite 27 - Vista system

RocketRAID 1720 Driver and Software Installation4 -as “broken”.Broken arrays can be automatically rebuilt using hot-spare disks.However, if there are

Seite 28 - Overview

RocketRAID 1720 Driver and Software Installation4 -7 – OCE/ORLMThe RR1720 supports both OCE (online capacity expansion) and ORLM (Online RAIDLevel Mig

Seite 29

RocketRAID 1720 Driver and Software Installation4 -However, you should always stop the transform progress from the RAID Manage-ment software.4. An une

Seite 30 - 3 - Creating an Array

RocketRAID 1720 Driver and Software Installation4 -Renaming an Array1. Highlight the “Management” menu, and select the “Array Management”function.2. H

Seite 31

RocketRAID 1720 Driver and Software Installation4 -Note: The software does not support SMTP servers that require user authentication.To add a Recipien

Seite 32 - 5 - Configuring Spare Disks

RocketRAID 1720 Driver and Software Installation4 -To test E-mail notification:1. Highlight the “Management” menu, and select the “Event Notification”

Seite 33 - Verifying an Array

RocketRAID 1720 Driver and Software Installation4 - To add a new scheduled task:Click the “New” button on the toolbar. The new task schedule wizard w

Seite 34 - 7 – OCE/ORLM

Windows Driver Installation ...4-31 - Installing the RAID Managemen

Seite 35 - S.M.A.R.T Status

RocketRAID 1720 Driver and Software Installation4 -1. Enter a name for the task.2. Configure the frequency for the task.3. Set the duration for the ta

Seite 36 - 9 - Managing Events

RocketRAID 1720 Driver and Software Installation4 -1. Highlight the “File” menu, and select the “Remote Control” function.2. Click the Add button on t

Seite 37

RocketRAID 1720 Driver and Software Installation4 -Note: The System Address cannot be modified. If you insist on modifying this item,you must first d

Seite 38 - Add a Scheduled Task

RocketRAID 1720 Driver and Software Installation4 -Note: The initial user name/password for a remote system is RAID/hpt. You are freeto modify the us

Seite 39 - To add a new scheduled task:

RocketRAID 1720 Driver and Software Installation4 -Event Port - The client software will retrieve events through this port. The defaultvalue is 7403.

Seite 40 - Add a Connection

RocketRAID 1720 Driver and Software Installation4 -1. Click the “Add” button in the User Management window.2. In the popup window, enter the user name

Seite 41 - Modify a Connection

2. Click the “Set Password” option, and enter the password for the user.3. Click OK to apply your selections.Set PrivilegeThe Administrator uses this

Seite 42 - Connect to a Remote System

Chapter 5Linux Driver SupportContents of this Chapter:Fedora Core 6 Linux installation OverviewRed Hat Enterprise 4 OverviewSuSE Linux Enterprise Serv

Seite 43 - System Configuration

Linux Driver Support5 -1 – Fedora Core 6 Linux installation OverviewThis section provides instructions describing how to install and utilize theRocket

Seite 44 - Add a User

Linux Driver Support5 -3) When prompted “Do you have a driver disk?”, select “Yes”. At the “Insert yourdriver disk and press OK to continue” prompt,

Seite 45 - Set Password

Chapter 1IntroductionContents of this Chapter:About this guideIntroducing the RocketRAID 1720 Host AdapterProduct FeaturesUnderstanding RAID Concepts

Seite 46 - Set Privilege

Linux Driver Support5 - Use the command “mkdir xxxx” to create a mount point for the RAID array. Thenmount /dev/sda1 /xxxx in order to access i

Seite 47 - Linux Driver Support

Linux Driver Support5 -2. If the original driver is installed in the /lib/modules/‘uname –r‘/kernel/drivers/scsi/ directory, and loaded by the script

Seite 48 - Host Adapter

Linux Driver Support5 -1 - Red Hat Enterprise 4 OverviewThis section provides instructions describing how to install and utilize theRocketRAID 1720 Ad

Seite 49

Linux Driver Support5 -the system be to boot from the RocketRAID 1720.Continue the installation as normal. You can refer to Red Hat Enterprise Linux i

Seite 50 - 4 - Updating the Driver

Linux Driver Support5 - To create a partition on this array (which will listed as /dev/sda1), use the “fdisk /dev/sda” command. Next, use th

Seite 51 - 6 - Uninstalling the Driver

Linux Driver Support5 -4 - Updating the DriverIf you are not booting from disks attached to RocketRAID 1720 controller, you canupdate the driver just

Seite 52

Linux Driver Support5 -1 – SuSE Linux Enterprise Server (SLES) installationOverviewThis section provides instructions describing how to install and ut

Seite 53

Linux Driver Support5 -4. When the “Diver Update Menu” is displayed, press “OK” and “back” for backto installer.5. Next. Select “back” to return to th

Seite 54

Linux Driver Support5 -title Linuxkernel (hd0,1)/vmlinux root=/dev/hda1 acpi=offinitrd (hd0,1)/initrdReboot the system to allow the new kernel paramet

Seite 55 - 5 - Uninstalling the Driver

Linux Driver Support5 -3. Use the command “mkdir xxxx” to create a mount point for the RAID array.Then, mount /dev/sda1 /xxxx in order to access it.No

Seite 56

Introduction1 -About this GuideThe RocketRAID 1720 SATAII Host Adapter’s User’s Guide provides informationabout the functions and capabilities of the

Seite 57 - Step 1 Update Grub

4 – Updating the DriverTo update the driver, simply reinstall the driver following the steps in previoussection, “ Install RocketRAID 1720 Driver on a

Seite 58

Chapter 6FreeBSD Driver SupportContents of this Chapter:1 - Installing FreeBSD on the RocketRAID 1720 Controller2 - Installing the RocketRAID 1720 Dri

Seite 59

FreeBSD Driver Support6 -1 - Installing FreeBSD on the RocketRAID 1720 Con-trollerIf you would like to install FreeBSD onto arrays attached to the Roc

Seite 60 - 4 – Updating the Driver

FreeBSD Driver Support6 -BIOS 636kB/74512kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(mailto:[email protected], Sat Apr 21 08:46

Seite 61 - FreeBSD Driver Support

FreeBSD Driver Support6 -for FreeBSD 4.10-RELEASEok load disk1:rr172x-4.10.kofor FreeBSD 4.11-RELEASEok load disk1:rr172x-4.11.kofor FreeBSD 5.0-RELEA

Seite 62 - Step 2 Install FreeBSD

FreeBSD Driver Support6 -7. Before exiting installation, an additional step must be taken to copy theRocketRAID 1720 driver module to the system. On t

Seite 63 - <-press SPACE key

FreeBSD Driver Support6 - For FreeBSD 4.x:# vnconfig vn0c freebsd_xxx.img# mount /dev/vn0c /mnt# cp /mnt/rr172x-xxx.ko /modules/rr172x.ko# vnconfig

Seite 64

FreeBSD Driver Support6 - <- For FreeBSD 5.1 and later: select “6” on “Welcome toFreeBSD” screen. Hit [Enter] to boot immediately, or any oth

Seite 65 - Step 1 Copy the Driver Module

Step 4 Configure the System to Mount Volumes at StartupInstruct the system to automatically mount the array by modifying the file /etc/fstab.Example:

Seite 67

Introduction1 -• Support Windows (XP, 2000, Server 2003, Vista), Linux and FreeBSD• RoHS CompliantUnderstanding RAID Concepts and TerminologyThe follo

Seite 68 - 4 - Uninstalling the Driver

Customer SupportIf you encounter any problems while utilizing the RocketRAID1720, or have anyquestions about this or any other HighPoint product, feel

Seite 69 - Customer Support

FCC Part 15 Class B Radio Frequency Interference statementThis equipment has been tested and found to comply with the limits for a Class Bdigital devi

Seite 70

Foreground initializationForeground initialization will zero-out all data on the array. The array is not accessibleby the operating system until initi

Seite 71

Chapter 2RocketRAID 1720Hardware Description/InstallationContents of this Chapter:RocketRAID 1720 Hardware1 - RocketRAID 1720 Adapter Layout2 - LED Co

Kommentare zu diesen Handbüchern

Keine Kommentare