Highpoint RocketRAID 2302 Betriebsanweisung PDF herunterladen (Seite 68)

Linux Driver Support

Step 1 Update Grub

If you are running an SLES SMP System, you must first update the /boot/grub/menu.

lst.

Example:

default=0

timeout=8

title Linux

kernel (hd0,1)/vmlinux root=/dev/hda1 acpi=off

initrd (hd0,1)/initrd

Reboot the system to allow the new kernel parameters to take effect.

Step 2 Install the Driver Module

Extract the module file from the file /linux/suse /[arch]-[version]/install/update.tar.gz

(from the driver disk), using the following commands (SLES 9 is used as an example):

# mount /dev/fd0 /mnt/floppy

# cd /

# tar xfz /mnt/floppy/linux/suse/i386-sles9/install/update.tar.gz

The driver modules will be extracted to the directory /lib/modules/[kernel-ver]/kernel/

drivers/scsi/ .

After you have extracted the driver module, you can load it by following commands:

# modprobe sd_mod

# insmod rr2310_00.ko

Then you can access the arrays attached to the controller as SCSI devices (e.g. /dev/

sda).

5-12

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 80 81

Keine Kommentare

Highpoint RocketRAID 2302 Betriebsanweisung Seite 68