Highpoint RocketRAID 3540 Betriebsanweisung PDF herunterladen (Seite 49)

Linux Driver Support

6-2

command to make the boot diskette. Insert a floppy disk into the floppy drive and

type the command(Example): #dd if=rr3xxx_4xxx-fedora.img of=/dev/fd0

Step 4 Install Fedora Linux

Installation steps for Fedora 8

1. Start installing Fedora Linux by booting from the installation DVD.

2. On “Welcome to Fedora” installation screen, press “ESC”, then a prompted label

“boot:” will appear at the top of the screen. Type in “linux dd” (without quotation

mark) and then press Enter.

3. When prompted “Do you have a driver disk?” Select “Yes ”. When prompted

“Insert your driver disk and press OK to continue”, insert the driver diskette in

the floppy drive and then select “OK”. The system will load RR3540 driver

automatically. When prompted “Do you wish to load any more driver disks?”

Select “No”.

4. Continue the installation as usual. You can refer to Fedora Linux installation

guide. Make sure you have finished the next step before system reboot.

5. When installation finishes and prompts you to reboot the system, press

“CTRL+ALT+F2” to the shell and type the following commands:

# chroot /mnt/sysimage

# mount /dev/fd0 /mnt

# sh /mnt/fedora-install-step2.sh

# umount /dev/fd0

# exit

Then switch back to console 1 and finish the installation.

Installation steps for Fedora 7

6. Start installing Fedora Linux by booting from the installation DVD.

7. On “Welcome to Fedora” installation screen, press “ESC”, then a prompted label

“boot:” will appear at the top of the screen. Type in “linux dd updates” (without

quotation mark) and then press Enter.

8. When prompted “Do you have a driver disk?” Select “Yes ”. When prompted

“Insert your driver disk and press OK to continue”, insert the driver diskette in

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 80 81

Keine Kommentare

Highpoint RocketRAID 3540 Betriebsanweisung Seite 49