Highpoint RocketRAID 2302 Betriebsanweisung PDF herunterladen (Seite 77)

FreeBSD Driver Support

>> FreeBSD/i386 BOOT

Default: 0:ad(0,a)/boot/loader

boot:

BTX loader 1.00 BTX version is 1.01

Console: internal video/keyboard

BIOS driver A: is disk0

BIOS driver C: is disk2

BIOS 636kB/74512kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8

(mailto:[email protected], Sat Apr 21 08:46:19 GMT

2001)

Loading /boot/defaults/loader.conf

/kernel text=0x24f1db data=0x3007ec+0x2062c -

<- For FreeBSD 5.1 and later: select “6” on “Welcome to

FreeBSD” screen.

Hit [Enter] to boot immediately, or any other key for

command prompt.

Booting [kernel] in 9 seconds…

<-press SPACE key

Type ’?’ for a list of commands, ’help’ for more de-

tailed help.

ok load rr2310_00

/modules/rr2310_00.ko text=0xf571 data=0x2c8+0x254

ok autoboot

Note: If you have configured a RAID 10 using 4 disks, it will be registered to system

as device /dev/da0. You can use “/stand/sysinstall” to create partitions and

disklabels (like da0s1e) on da0. Then, create a new filesystem using “newfs /dev/

da0s1e”. Now you can mount /dev/da0s1e to somewhere to access it

Step 3 Configure System to Automatically Load the Driver

To avoid typing in “load rr2310_00” each time the operating system is booted, the

system must be instructed to automatically load the module during bootup. To

configure the system to automatically install the module, type in the following

commands:

6-6

1 2 ... 72 73 74 75 76 77 78 79 80 81

Keine Kommentare

Highpoint RocketRAID 2302 Betriebsanweisung Seite 77