Highpoint ROCKETRAID 2322 Betriebsanweisung PDF herunterladen (Seite 53)

Linux Driver Support

Red Hat Enterprise 4 Overview

This section provides instructions describing how to install and utilize the

RocketRAID 2322 Adapter on a Red Hat Enterprise 4 Linux system.

1 - Installing Red Hat Enterprise 4 (AS, ES, WS) Linux on the

RocketRAID 2322 controller

To install Red Hat Enterprise Linux onto disks or RAID arrays attached to

RocketRAID 2322:

Step 1 Prepare the Driver Diskette

The driver is provided in a floppy diskette image file format.

On a DOS or Windows system, a driver diskette can be generated using rawrite.exe.

This utility is included on the Red Hat Enterprise Linux CD (under /dosutils). Run

rawrite using a command prompt window, and follow the directions it provides.

On a Linux system, use the “dd” command to generate a boot diskette. Insert a

floppy disk into the floppy drive and type the following command (amd64 driver for

example):

# dd if=rh3dd-amd64.img of=/dev/fd0

Step 2 Install Red Hat Enterprise Linux

1. Start installing Red Hat Enterprise Linux by booting from the installation CD.

2. At the “Welcome to Red Hat Linux” installation screen, a prompt labeled

“boot:” will appear at the bottom of the screen. Type in linux dd, then press

Enter.

boot: linux dd

3. When prompted “Do you have a driver disk?”. Select “Yes”.

4. When prompted “Insert your driver disk and press OK to continue”, insert

the driver diskette into the system’s floppy drive, and select “OK”.

5-5

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 72 73

Keine Kommentare

Highpoint ROCKETRAID 2322 Betriebsanweisung Seite 53