Highpoint RocketRAID 3530 Betriebsanweisung PDF herunterladen (Seite 16)

RocketRAID BIOS Utility

BIOS Commands

System

User/Supervisor modes – interface modes

Change password - for Supervisor mode

Exit the utility – quit and exit the RocketRAID BIOS utility

Disk

Information – displays information about the select hard disks

Initialize – initialize the selected disks (required in order to use new hard disks for

creating RAID arrays, disk replacement, or configuring spare disks.

Toggle Spare – configure spare disks.

Unplug – remove the selected disks (hot-swap)

Turn on write cache – enable write cache for the selected disks

Turn off write cache – disable write cache for the selected disks

Rescan – prompts the RocketRAID card to scan for new hard disks.

Array

Information – displays information about the selected RAID array

Create – Create a RAID array using the selected disks

Delete – Delete the selected RAID array

Unplug – Remove the selected RAID array (safe removal of disk members of the target

array - hot-swap)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Keine Kommentare

Highpoint RocketRAID 3530 Betriebsanweisung Seite 16